September 12, 2016

16 Common Interview Questions & Answers on Generators - Part-1

Figure: Generator Output

1. What is a Generator?

A Generator is a machine which converts Mechanical Energy into Electrical Energy.

2. On which principle a Generator works?

Generator works on Faradays laws of “Electro Magnetic Induction ”

3. What are Faradays laws of Electro Magnetic Induction?

First Law: Whenever a conductor cuts magnetic flux an E.M.F is induced in that conductor.

Second Law: The magnitude of the induced e.m.f. is equal to the rate of change of flux linkage.

4. What are the two main parts of an AC Generator?

  1. Stator
  2. Rotor

5. What is the main difference between an AC Generator and DC Generator?

In an AC Generator the field is rotating and the armature is stationary whereas in DC Generator the field is stationary and the armature is rotating.

6. What are the advantages of stationary armature and rotating field in an AC Generator?

  1. It is easy to take output from the stationary armature.
  2. It is easier to insulate stationary armature for higher voltage.
  3. Low voltage excitation supply can be easily supplied to the rotor through slip rings.

7. What is the relation between the frequency, pole and speed of a Generator?

F = PN/120 Hz
     Where P is the No.of Poles
     N is the Speed in RPM.

8. In a Generator with 2 pole, and speed 3000 rpm, what is the frequency of the induced emf ?

F = PN/120
  = 2 x 3000/120
  = 50 Hz.

9. What is the connection of winding in a stator?

Double star connection.

10. What is the efficiency of a Generator?


11. What is the coolant used to cool stator winding?

Demineralised water

12. What is the coolant used to cool rotor winding?


13. What are the advantages of Hydrogen gas as coolant over others?

  1. Density is 1/14 of air.
  2. Windage loss is low.
  3. Low noise.
  4. Heat transfer co efficient is 1.5 times higher than air.
  5. Thermal conductivity is 7 times higher than air.

14. What are the losses in a Generator?

  1. Stator copper
  2. Stator iron
  3. Rotor copper
  4. Windage loss 
  5. Stray loss
  6. Friction loss

15. What is Short Circuit Ratio (SCR) of a Generator?

It is the ratio of the field current required to produce rated voltage on open circuit to the field current required to circulate rated current on short circuit.

16. What is the value of SCR in a 210 MW Turbo alternator?

SCR = 0.49

Download this Article as PDF:
 16 Question & Answer on Generator - Part-1

Related Post: 

  1. 21 Common Interview Question and Answers in AC Generator - Part-2
  2. 37 Interview Questions and answers on DC Generators - Part-3


12 Comment(s):

  1. Replies
    1. Thank you. Please click bellow this link for more.

  2. useful basic

  3. Thanks so much for posting a lot of this awesome content! Looking forward to checking out more.

    generator maintenance & bunded fuel tank hire

  4. I would want to purchase the generator in this YouTube video, but I'm just unsure if it is the most suitable
    one for me personally! Does anyone else know anything about the
    portable generator?

  5. Thank you for explaining digital marketing interview question and answers in detail. Now I have a much better idea about the digital marketing.hunt your dream digital marketing jobs in hyderabad .

  6. It is actually a great and useful piece of info.
    I am satisfied that you just shared this helpful info with us.
    Please stay us informed like this. Thank you for sharing.


Related Posts Plugin for WordPress, Blogger...